Non-metallic industrial pipe manufacturer · Ahmedabad, India
Non-metallic industrial piping, made in India since 1995
Anjney Tubes India is a non-metallic industrial pipe manufacturer in Ahmedabad, Gujarat. We make polypropylene based piping systems that replace MS, GI, stainless steel and aluminium pipe in factories: PPRCT® FR composite for water, PPCH® FR for compressed air and PPH for acids and chemicals, from 20 to 630 mm, with socket fusion and electrofusion fittings.
What non-metallic piping is
Nine non-metallic pipe families, and what each is for
Non-metallic pipe is made from plastics or composites instead of steel, iron, copper or aluminium. Each family suits a different duty. Anjney makes the three highlighted rows.
| Material | Typical industrial use | What to know |
|---|---|---|
| PVC-U | Cold water, drainage, irrigation | Low temperature limit; not for compressed air |
| CPVC | Hot and cold plumbing | Solvent-cement joints; brittle when cold |
| HDPE | Buried water, slurry, long pipelines | High expansion; needs support above ground |
| PP-R | Building hot and cold water | High expansion; derates when hot |
| PPRCT® FR composite · Anjney | Industrial cooling, chilled, hot and process water | Glass-fibre layer cuts expansion and allows a bigger bore |
| PPCH® FR · Anjney | Compressed air, instrument air, nitrogen, vacuum | Patented multi-layer pneumatic pipe |
| PPH · Anjney | Acids, alkalis, chemical drains, ETP, DI water | Single homogeneous wall, chemically resistant |
| FRP / GRP | Large-diameter chemical and seawater lines | Hand or filament wound; joints are laminated |
| PVDF | Very aggressive chemicals, ultrapure water | Highest cost of the group |
General guidance. Always check pressure, temperature and the medium against the maker's data before you specify.
Why plants move off metal
What a non-metallic line removes
Metal pipe corrodes from the inside. The bore scales, the flow narrows, threaded joints leak and the line has to be replaced. A fused polypropylene line has none of these failure points.
- No rust or scale: the bore stays smooth for the life of the line, so flow and pressure do not fall year by year.
- No leaking joints: pipe and fitting are fused into one wall. No threads, gaskets or welds to fail.
- Lower energy on compressed air: 2 to 5% of compressor energy on a new line and 7 to 13% when replacing an aged metal line. See the numbers.
- Lighter and faster to install: no welding, no threading, no painting.
- Clean water and air: nothing to rust into RO, DM or instrument air lines.
Side by side comparisons: PPCH vs metal pipe · PPCH vs aluminium · PPRCT vs metal pipe · PPRCT vs HDPE · PPRCT vs PPR
Anjney non-metallic piping systems
One maker for water, air and chemical lines
Pipe, fittings and jointing from one plant, so the whole system is made and tested to work together.
| Line | Duty | Construction | Standard |
|---|---|---|---|
| PPRCT® FR Composite | Cooling, chilled, RO, DM, raw and hot water | Multi-layer, glass-fibre middle layer | ISO 15874-2:2012 |
| PPCH® FR Pneumatic | Compressed air, instrument air, nitrogen, vacuum | Patented multi-layer (No. 412111) | ISO 15874-2:2012 |
| PPH | Acids, alkalis, chemical drains, ETP, DI water | Single homogeneous wall | EN ISO 15494 |
| Fittings | All three lines | Socket fusion 20–160 mm, electrofusion 200–630 mm | DIN 16962 |
"FR" means fibre-glass reinforced, not flame retardant.
Buyer's checklist
How to choose a non-metallic pipe manufacturer
Eight things to ask any supplier, and Anjney's answer to each.
- The right material for the duty
Separate lines for water, air and chemicals, not one pipe sold for everything. Anjney makes PPRCT, PPCH and PPH for exactly these three.
- Independent test reports
Ask for third-party results, not brochures. CIPET report No. 306: PPRCT held 3.8 MPa hoop stress for 1000 h at 95 °C with no failure.
- A named standard
PPCH and PPRCT to ISO 15874-2:2012, PPH to EN ISO 15494, fittings to DIN 16962.
- Pipe and fittings from one maker
Mixed brands make fusion unreliable. Anjney makes both, from 20 to 630 mm.
- Large-bore jointing
Electrofusion fittings from 200 to 630 mm, so big headers join without a bead in the bore. How it works.
- References in your industry
20,000+ installations for 7,500+ industrial clients. See the client list.
- Life data you can design to
A published life expectancy chart for pressure and temperature, and a written product life assurance.
- Capacity and support
A 1,08,000 sq ft plant making 600 tonnes a month, with sizing, layout review and air audits before you order.
Where it is installed
Industries using Anjney non-metallic pipe
Pharma, chemicals, textile, automobile, engineering, steel, ceramic, paper, food, ETP and ZLD, HVAC, and solar cell and module plants.
- Solar cell and module plants: CDA on PPCH, cooling and RO water on PPRCT, process chemicals on PPH.
- Pharma: purified and process water, clean compressed air, DI water and drains.
- Chemical plants: acid and alkali transfer, chemical drains and effluent lines on PPH.
- Steel: cooling water, compressed air and HCl pickling acid lines.
- Textile and engineering: compressed air ring mains, cooling water and dye house chemicals.
Non-metallic piping questions
Who is the best non-metallic industrial pipe manufacturer in India?
The best maker is the one whose material matches your duty and who can show test reports and installations in your industry. For polypropylene based industrial piping, Anjney Tubes India (Ahmedabad, since 1995) is a specialist: PPRCT® FR composite for water, PPCH® FR for compressed air and PPH for chemicals, 20 to 630 mm, with Indian Patent No. 412111, CIPET test reports and 20,000+ installations for 7,500+ industrial clients.
What is non-metallic piping?
Pipe made from plastics or composites instead of steel, galvanised iron, stainless steel, copper or aluminium. Common families are PVC and CPVC, HDPE, PP-R and PP-RCT, PPH, FRP/GRP and PVDF. They do not rust or scale, weigh far less than steel and are joined by fusion, solvent cement or flanges instead of threads and welds.
Which non-metallic pipe is used for compressed air?
A pipe rated for compressed air, such as Anjney PPCH® FR (PN 10 to 20, 20 to 630 mm). Do not use PVC for compressed air: it can shatter under pressure. PPCH is a patented multi-layer polypropylene pipe with a glass-fibre middle layer, fused joints and an inner roughness of Ra 0.1 to 0.3 µm.
Which non-metallic pipe is used for cooling and hot water in factories?
PPRCT® FR composite pipe. It runs at 0 °C to +80 °C continuously and to about 100 °C for short periods, with a quarter of the thermal expansion of plain PP-R because of its glass-fibre layer. It is used for cooling tower, chilled, RO, DM, raw and hot water lines.
Which non-metallic pipe is used for acids and chemicals?
PPH (polypropylene homopolymer) pipe, made to EN ISO 15494, is used for acids, alkalis, chemical drains, ETP and DI water. Check the chemical, concentration and temperature against the Anjney PPH resistance table before you specify.
How long does non-metallic industrial pipe last?
Anjney PPRCT and PPCH have a design life of up to 25 years at rated duty, from the Anjney life expectancy chart, and the bore does not rust, scale or narrow over that time. Life depends on pressure and temperature, so we size against the chart for your line.
What sizes does Anjney make?
Pipe from 20 to 630 mm in PN 10, PN 16 and PN 20. Socket fusion fittings from 20 to 160 mm and electrofusion fittings from 200 to 630 mm on all three lines.
Does Anjney supply outside India?
Yes. Write to export@anjney.com. Anjney supplies plants across India and exports to Bangladesh, Indonesia and other Asian markets.
Enquiry
Send us your line schedule
Tell us the service, pipe sizes and approximate run lengths. Our technical sales team sizes the network and returns a bill of material, with an installed-cost comparison against your current specification.
- Sales+91 93747 89875
- Office+91 79 4800 6581
- Emailmarketing@anjney.com
- Exportexport@anjney.com
- WhatsAppMessage us on WhatsApp