Anjney Tubes India  /  Est. 1995  /  Ahmedabad +91 93747 89875 marketing@anjney.com
Anjney Tubes India

3D models · PPCH® · PPRCT® · PPH

Every pipe, fitting and plant line, in 3D

Turn any Anjney pipe or fitting in your hand. Then walk through a solar cell, solar module, chemical, pharma, steel, textile or engineering plant and see which pipe runs on which line.

Pipes and fittings in 3D

Hold the mouse button and drag to turn the model (on a phone, swipe sideways); Ctrl + scroll or pinch zooms. Fittings come in the colour of their line: blue PPCH, green PPRCT, grey PPH.

Pipes

Socket fusion fittings, 20–160 mm

Electrofusion fittings, 160–630 mm

Drag to rotate · Ctrl + scroll to zoomSwipe sideways to rotate · pinch to zoom

This browser is running without graphics acceleration, so 3D will be slow. In Chrome or Edge, open Settings → System, turn on Use graphics acceleration when available and relaunch.

3D could not start in this browser. Try Chrome, Edge or Safari with graphics acceleration on.

PPCH® FR pipe · four layers · compressed air, nitrogen, vacuum · 20–630 mm

Plant piping in 3D, by industry

One layout per industry, lines always in the same order: PPH chemical lines first, then PPCH compressed air, then PPRCT water. Typical layouts for illustration; every plant is engineered to its own utility list.

3D model of a solar cell plant: PPH chemical, drain, ETP and DI water lines, PPCH compressed air and PPRCT cooling, chilled and RO water lines

Drag to rotate · Ctrl + scroll to zoomSwipe sideways to rotate · pinch to zoom

This browser is running without graphics acceleration, so 3D will be slow. In Chrome or Edge, open Settings → System, turn on Use graphics acceleration when available and relaunch.

3D could not start in this browser. Try Chrome, Edge or Safari with graphics acceleration on.

View

Click a line to see it on its own, with its flow.

Which Anjney pipe on which line

The same rule in every plant. Socket fusion from 20 to 160 mm, electrofusion from 160 to 630 mm.

IndustryPPHPPCH® FRPPRCT® FR
Solar cell plantChemical lines (KOH, HF, HCl), Chemical drain, ETP line, DI water lineCDA (clean dry air)CT water, Chilled water, insulated, RO water distribution
Solar module plantChemical drainCDA (stringers, laminators, robots)CT water, Chilled water, insulated, RO water distribution
Chemical plantAcid and alkali transfer, Chemical drain, ETP line, DI and process waterInstrument and plant airCT water, Chilled water, insulated
Pharmaceutical plantChemical drain, ETP line, DI water (utility, non product contact)Compressed air (utility)CT water, Chilled water to AHUs, insulated, RO water distribution
Steel plantHCl pickling acid lines, Acid drain, ETP and acid regenerationCompressed airCT water
Textile plantDye chemical dosing, Dye house drain, ETP lineCompressed air for air-jet loomsCT water, Humidification and RO water
Engineering and auto plantPaint pretreatment drain, ETP lineCompressed airCT water, Chilled water, insulated

Send your utility list for a line schedule

3D models and line selection

Which pipe is used for chemical, drain, ETP and DI water lines in a solar cell plant?

Anjney PPH. It carries KOH, HF and HCl process chemicals, chemical drains, the ETP line and DI water, and is joined by socket fusion up to 160 mm and electrofusion from 160 to 630 mm.

Which pipe is used for compressed air and CDA lines?

Anjney PPCH® FR, the patented four-layer compressed air pipe. Its smooth bore does not rust or scale, so pressure drop stays low for the life of the line.

Which pipe is used for CT water, chilled water and RO water distribution?

Anjney PPRCT® FR, the four-layer glass-fibre reinforced water pipe. Chilled water lines are insulated and clad; CT water and RO water lines usually run bare.

Can PPH be used for purified water or WFI in a pharma plant?

No. Product-contact purified water and WFI loops are normally 316L stainless steel or PVDF under GMP. Anjney PPH is used on pharma utility lines: chemical drains, ETP and non product contact DI water.

Which jointing method is used on these lines?

Socket fusion from 20 to 160 mm and electrofusion from 160 to 630 mm. Both leave the bore clear, unlike butt fusion, which leaves a bead ring inside every joint.

Can Anjney prepare a piping layout for my plant?

Yes. Send your utility list, line sizes and a plot plan; our technical team returns a line schedule with pipe, fittings and jointing for each line.

Enquiry

Send us your line schedule

Tell us the service, pipe sizes and approximate run lengths. Our technical sales team sizes the network and returns a bill of material, with an installed-cost comparison against your current specification.

Sent straight to our sales team at marketing@anjney.com. We use your details only to reply to this enquiry.

Document Open in new tab Download